How to Fix the Keurig Not Ready Issue|Easy Fix

Most people’s houses have Keurig coffee brewers on the counter, thus brewing great coffee in an instant. Conversely, it can also undergo some difficulties, like other home appliances. The “Not Ready” message is one of the most detestable problems that a Keurig user can experience.

It is even more annoying when you are desperate for your morning cup of coffee. But if this happens to you, do not worry because we have a comprehensive guide for diagnosing and fixing it

The “Not Ready” error on the Keurig machine is a nuisance, especially at that time when you want to make a cup of coffee to refresh your mood, but it is an indication that there is a problem with the machine making coffee for you.

These are some of the main reasons why the “Not Ready” message appears

Power Supply Issues: There could be an inconsistent supply of power to Keurig because of electrical connection issues and problems with the power outlet.

Water Reservoir Issues: The water reservoir might not be placed in position properly in the machine, or it could have less water for brewing.

Clogged Needles: Coffee dust and other dirt, as they pile up, can block the needles that pierce K-cups, preventing them from brewing.

Sensor Malfunction: Sometimes, internal sensors within Keurig may fail to work correctly, impacting its ability to detect water levels, temperature, or any other factor required when brewing.

Now that you have gained an understanding of the reason behind the ‘Not Ready’ message appearing, it is time to take the necessary steps to resolve the issue on your own.

Below are several effective strategies to help your Keurig start brewing coffee efficiently once more.

Following these steps can help “reset” your Keurig and potentially resolve temporary glitches causing the “Not Ready” error:

Unplug the Keurig: Disconnect the power cord from the electrical outlet. This cuts off the power supply to the machine.

Wait for at least 30 seconds: During this time, any residual electricity stored in the Keurig’s internal components dissipates. This allows for a complete “fresh start” when you power it back on.

Plug the Keurig back in and turn it on: Reconnect the power cord to the outlet and press the power button on the Keurig. Observe if the “Not Ready” message disappears and the machine functions normally.

This process essentially restarts Keurig’s internal software, similar to how rebooting a computer can sometimes fix minor software issues.

Check the Placement:

  • Open the Keurig’s lid or compartment where the water reservoir sits.
  • Visually inspect if the reservoir is fully inserted into its designated space.
  • Look for any alignment guides or markings on the Keurig and reservoir to ensure proper positioning.

Verify Water Level:

  • Locate the water level indicator on the water reservoir. It’s usually a transparent window or markings on the side of the reservoir.
  • Compare the water level to the minimum fill line indicated on the reservoir.
  • If the water level is below the minimum fill line, add water until it reaches the appropriate level.
  • Note: Refer to your Keurig’s user manual for specific information and visuals about the water reservoir’s placement and water level requirements.

Sometimes, just make sure the handle on the Keurig coffee maker is completely lowered and clicked in place to fix the “Not Ready” message.

This is because Keurig machines require you to make sure the handle is tightly closed before you can start brewing. If the handle is not completely closed, the machine may not realize that there is a K cup inside, or it may not be able to properly puncture the cup, which will display a “Not Ready” message.

Here’s a step-by-step approach to deal with this:

  • Begin by opening the handle to check for any leftover K-Cup. If present, remove it. Then, if you intend to brew a beverage, insert a new K-Cup.
  • Ensure the handle is closed securely by firmly pressing it down until you hear a click. The click indicates that the handle is fully closed and ready for brewing.
  • Once the handle is closed, glance at the display on your Keurig. If all settings are correct, the “Not Ready” message should vanish.

Coffee grounds and debris can accumulate over time, clogging the needles in your Keurig coffee maker. This obstruction can impede the brewing process, leading to slow brewing or incomplete extraction of coffee.

Steps to Clean the Needle:

  • Turn off and unplug your Keurig, then remove the K-Cup holder.
  • Inspect the needle for debris and use a cleaning tool to remove any obstructions.
  • Flush the needle with water to ensure thorough cleaning.
  • Reassemble the K-Cup holder and run a cleansing brew cycle.
  • Test the Keurig by brewing a fresh cup of coffee to confirm the needle is clean and functioning properly.

If your Keurig is still displaying the “Not Ready” error, it may be due to mineral buildup inside the machine. Perform a descaling procedure using a descaling solution to remove any limescale and mineral deposits.

Descaling Process:

Prepare the Descaling Solution:

  • Purchase a descaling solution specifically designed for coffee makers. Alternatively, you can make a descaling solution using equal parts water and vinegar.
  • Mix the descaling solution according to the instructions on the package or recipe.

Empty the Water Reservoir:

  • Ensure that the water reservoir of your Keurig is empty before beginning the descaling process.
  • If there is any water left, pour it out and discard it.

Prepare the Keurig:

  • Place a large mug or container on the drip tray to catch the descaling solution and water during the descaling process.
  • Ensure that the Keurig is turned off.

Just pour the descaling solution into the water tank.

  • Pour the prepared descaling solution into the water reservoir of the Keurig.
  • Fill the reservoir to the maximum fill line or as per the instructions on the descaling solution package.

Run the Descaling Cycle:

  • Turn on the Keurig and start a brewing cycle without inserting a K-Cup.
  • Select the largest cup size option to ensure that the descaling solution flows through the entire system.
  • Allow the descaling solution to brew and flow into the mug or container placed on the drip tray.

Discard the Solution:

  • Once the descaling cycle is complete, discard the descaling solution from the mug or container.
  • Repeat the process if necessary until the water reservoir is empty.

Rinse the Keurig:

  • Rinse the water reservoir thoroughly with clean water to remove any traces of the descaling solution.
  • Fill the reservoir with clean water and run several brewing cycles without a K-Cup to flush out any remaining descaling solution from the system.

Reassemble and Test:

  • Reassemble the components of the Keurig, including the water reservoir and drip tray.
  • Fill the water reservoir with fresh water and run a brewing cycle with a K-Cup to test the Keurig.

It should only take around 45 minutes to complete the whole thing.

In case the above steps fail to work, reset the Keurig back to its factory settings. For a reset procedure, refer to the user manual. This may help in clearing any persisting glitches and getting your machine running correctly again.

If all else fails, don’t hesitate to reach out to Keurig’s customer support team for assistance. They can help out with more troubleshooting tips or set up repairs if needed.

The moment you meet the “Not Ready” error on your Keurig, it can undoubtedly be frustrating, but by carrying out some troubleshooting steps, the problem can be quickly sorted out and you can get back to brewing your favorite beverages.

By following the tips outlined in this article, you will be able to confront the problem directly and keep your Keurig operating in a smoother way for many years to come.

Leave a Comment