How to Solve Error Codes 2, 8, 9, 11, etc on Keurig

Facing some error codes in your Keurig coffee maker that are stopping you from making coffee? No need to worry about this anymore because this guide is going to help you fix these error codes with a step-by-step solution.

We will cover every Keurig model, from the K-cafe to the K-express and the Keurig K-Duo. So read the full article to learn how to solve error codes 2, 8, 9, 11 etc on Keurig.

Error Code 2

What Does Error Code 2 Mean?

Error Codes 2, 8, 9, 11, etc On Keurig

Error code 2 is a common problem with the K-Supreme coffee machine. Usually, the display states: “Error code 2 Please wait a few minutes before attempting to brew again.”

This error occurs because the heating element within the machine does not work. As a result of insufficient refilling, the preheating tank dries and overheats.

How to Fix it?

First, you need to follow the suggestion that the machine is showing on the screen, which is to unplug the device and wait for about 15 minutes, then plug the machine in and switch it on.

If that does not work, TCO (thermal cut-out) will likely break down. When it is damaged, it pops like a fuse and must be replaced. If you cannot do it yourself or are not a professional, then you can contact any technician or Keurig customer service for the replacement of the TCO.

Error Code 11

What Does Error Code 11 Mean?

Keurig error code 11 is also a regular problem with the K-Supreme Brewer, suggesting a lack of water. This issue has numerous fixes.

Usually, this problem happens when the lid creates a vacuum seal that stops the water flow.

How to Fix it?

Getting Rid Of The Vacuum Problem

  • Remove the lid from the water tank to verify if this solves the problem.
  • Clean the water tank lid and rim carefully. The presence of water droplets between the tank and the cap may enhance the possibility of a vacuum seal developing.
  • If you want to do this procedure to solve the vacuum seal problem, drill a tiny hole in the tank lid. Proceed carefully and only if you’re confident in your ability to carry out the changes.

Fix The Water Filter

The water filter attachment is another reason that causes this issue. In order to solve this issue, take out the water filter attachment and try running a cup of hot water to see if this fixes the problem. If it succeeds, replace the original filter with a fresh one.

Get The Float Mechanism Unstuck

Furthermore, the system of floats (which shows the water level of the machine) might be clogged.

In order to solve this issue, take out the water tank from the machine and gently jiggle it until the floater frees itself. Remember to clean the water tank and the floater to keep it from getting stuck again in the future.

If any of these tricks do not work, try contacting  Keurig Support for further assistance. 

Although there is no conclusive recovery for Keurig Error Code 11, these troubleshooting procedures may assist in resolving the problem.

Error Code 8

What Does Error Code 8 Mean?

According to the Keurig handbook, the error code ‘8’ happens when the thermistor in the preheat tank detects a temperature greater than 240°F. The potential causes include problems with the thermistor or the heater triac.

How To Fix It?

To fix this problem, follow the instructions on the screen to please disconnect and reconnect the brewer.”

After disconnecting the machine, leave it to cool for about an hour before plugging it in again. This will allow the Keurig coffee machine to cool down and maybe resolve the issue.

Error Code 9

What Does Error Code 9 Mean?

The error code 9 generally happens due to the air bubbles in the tubes.

How To Fix It?

  1. Check that there is water in the reservoir:  Remember to have enough water in the reservoir of your machine before trying to fix the problem.
  1. Unplug and reconnect the machine: Unplug your coffee maker for a while and then reconnect it.
  1. Click both the 12-ounce and the K-Cup buttons at the same time. Hold them until the machine turns off.
  1. Click the 12-ounce and K-Cup buttons once again, pressing them down as previously. The machine will come on and begin drawing water via the reservoir pump.
  1. Continue pressing the buttons to push any air bubbles out of the line. You need to do this until the whole reservoir gets empty. Pressing the button for about 30 seconds will be enough.
  1. Leave the buttons once you’ve finished pushing the air bubbles out.

Now, after all the steps, try making coffee. Check that the reservoir has enough water. Use your K-Cup, select the size you want (e.g., 8 ounces), then push the K-Cup button. Your system should now function normally without displaying error code 9 keurig.

Error Code 17 Overpressure Detected

What Does Error Code 17 Mean?

When there is too much pressure within the coffee maker, error code 17 appears. Often caused by blockage of the needles which puncture the K-cup.

How To Fix It?

Unclog the Coffee Maker

  • Unplug the coffee maker and take out the reservoir for cleaning.
  • Turn the coffee maker backwards to reach the lid, then open it to find the needle that punctures the K-cup while brewing.
  • Determine the 3 holes surrounding the needle: two alongside it and one underneath it.
  • With the help of a paper clip or any other object like this, carefully put it in every hole. Twist and spin the paper clip to release any coffee grind or scale accumulation.
  • Rebuild the coffee maker by reconnecting the water reservoir and plugging it in.
  • Power on the machine and allow it to warm up; the error code will be gone.
  • Click the brewing button to flush out any remaining dust before making a cup of coffee. 

Descale The Coffee Maker

Additionally, the internal tube of your machine may be blocked. You can fix this issue by going through the descaling process on your Keurig coffee maker.

Error Code 1R or FR

What Does Error Code 1R Or FR Mean?

The error code of 1R or FR is very common in Keurig coffee makers, especially in K-Duo. This error code appears due to a software issue. You need to reset your machine to resolve this issue.

How To Fix It?

  1. First, unplug the coffee maker
  2. If the K-Cup is still inside the machine, remove it.
  3. Reconnect the Coffee Maker.
  4. Take out the lid from the single K-cup side.
  5. Lock the single K-cup side’s lid.
  6. Insert a mug for the K-Cup area.
  7. Turn on the power supply.

Allow a few seconds for the display to turn off if you detect water being dispensed. If there is no action, Keurig is most likely broken.

Tip: The procedure outlined above is commonly used to resolve Keurig error code 66.

Final Words

If you own any of the Keurig coffee maker models, then you must be aware of their error codes, which are displayed on their screen. The most common errors are 2, 8, 9, 11, 17, and 1r and Fr.

By following all the steps mentioned above, you will fix these issues without going anywhere in the market.

If this trick does not work for you, then you will need to contact Keurig customer service for additional help.

2 thoughts on “How to Solve Error Codes 2, 8, 9, 11, etc on Keurig”

Leave a Comment