Keurig All Lights On And Not Working? know how to fix it

If you are facing a problem where keurig all lights on but not brewing (not working), don’t worry; you are not alone in facing this issue Many Keurig users have experienced this issue, and there is a solution to this issue as well. In a few simple steps, you can resolve it.

In this guide, we’ll go through all the possible causes of troubleshooting the “Keurig not working all lights on” problem and provide an easy fix to get your Keurig up and running again.

Understanding the Issue Why Keurig Not Working All Lights On

When all the lights remain on, it indicates a problem with the machine’s functionality. Possibly, there could be several factors contributing to this problem. Some problems can be smaller, but some can be tricky. Such as a power supply issue, a clogged system, or an error in the brewing process.

Check the Power Source

The very first thing you need to do is check that your Keurig is properly connected to a power source. Check that the power cable is firmly inserted into an electrical socket and that there is a power supply.

A faulty connection or a tripped circuit breaker might cause keurig all lights on but prevent the machine from running.

Your Keurig Coffee Machine Could Be Clogged

One of the most common problems is when the hole where the water comes out gets clogged. This happens because you haven’t cleaned up the machine in a long time. Gradually, the coffee gets stuck and makes the machine clog up.

Although it’s not a very big issue, you can fix it by cleaning the hole. Do it by lifting the lid, and then cleaning the hole with the help of a needle or a paper clip. Make sure the machine is unplugged before you start cleaning.

Next, remove the K-cup holder and clean all the holes at the bottom.

Once all holes are fully cleaned, check the machine by plugging it in. Then close the lid and turn on the power button. By passing the water, the machine automatically checks whether the holes are open or not, and whatever waste is there, it will automatically throw it out.

And now you have to open the lid again to clean up what the machine has pushed out. And after doing all this, your Keurig machine has become like before.

Reset the Keurig Machine

You can fix the issue of Keurig all lights on by restarting your Keurig machine. Follow these simple steps to restart the machine:-

  • Turn off Keurig by pressing the power button.
  • Unplug the Keurig from the power outlet.
  • Wait for about a minute.
  • Reconnect the Keurig to the power outlet.
  • Press the power button to turn on the Keurig.
  • Allow the system to complete its startup sequence.
  • Your Keurig has been reset and is now ready to use.

By resetting the Keurig machine, it will resolve any minor issues or glitches that may have been affecting its performance.

Examine the water reservoir of your Keurig machine

Sometimes the water reservoir of your Keurig machine gets empty or is not placed correctly, so in that case, the machine does not operate as expected.

To fix this issue and examine the water reservoir of the Keurig machine, follow these simple steps:

First, you need to locate the water reservoir on your Keurig, which is located at the backside of the machine.

To see inside, lift the lid or remove the cover, check that the reservoir is properly fitted in its place, and also ensure that it is positioned and aligned with the machine.

Properly verify that the water level in the reservoir is sufficient. If you find it low, fill it with fresh and clean water to the reservoir’s recommended level.

Also, Inspect the reservoir to see if there are any damage, cracks, or leaks. If you find any of these issues, it’s better to replace the reservoir.

Clean the water reservoir if you find any waste or residue. As per the manufacturer’s instructions on how to clean the reservoir properly.

After all the issues you have solved related to the water reservoir of the machine, you’ll find that the machine is functioning properly.

Final Words

Owning a Keurig coffee machine is such a good thing because it’s one of the most popular home coffee makers available on the market.

It is really fun to have this machine with you, but sometimes it does not work properly, resulting in a situation where all the lights of your Keurig are on, and it’s really frustrating. 

However, you can follow the troubleshooting steps provided in the above article to easily solve the issue with your machine and later enjoy a cup of coffee again.

Remember to follow all the steps that we have discussed in the above article. If one solution is not working for you, just try the other one that we have mentioned and that will definitely work for you.

Click Here to fix the issue if your Keurig add water light stays on and not working

FAQs

Why won’t my Keurig brew despite all the lights being on?

The problem can be caused by several types of factors, including power supply issues, water reservoir problems, or pod compatibility. Solutions can be easily found in our troubleshooting guide.

How often should I descale my Keurig?

The timing of descaling is affected by the hardness of your water. It’s recommended to descale every 3–6 months, but you may need to do it more frequently in hard-water areas.

Can using non-Keurig pods damage my machine?

While non-Keurig pods may work, they can sometimes cause issues and may void your warranty. It’s best to use Keurig-approved pods for optimal performance.

Is there a way to prevent scale buildup in my Keurig?

Filtered water can help reduce mineral accumulation in your Keurig. Regular descaling is also crucial for maintenance.

Meet Vishu Yadav, the coffee connoisseur behind repaircoffee.com. With a barista background and a love for coffee, he explores diverse coffee cultures and brewing techniques. Join him for the latest trends, specialty roast reviews, and brewing insights on repaircoffee.com.

Leave a Comment