Keurig K155 Clicking Won’t Turn On (Solved)

Imagine that you wake up in the morning and wish for a fresh cup of coffee to get your day started. You went to your Keurig K155 to prepare your favorite drink, but it won’t turn on as normal. Instead, it makes an unpleasant clicking sound that will ruin your mood.

But you don’t need to worry about this; it’s not a big issue. Many Keurig K155 users have faced this issue at some point. In this article, we will cover all the possible causes of this issue and the solutions to fix it.

Why The Keurig K155 Clicking Won’t Turn On

If your Keurig K155 is acting up and won’t turn on, don’t worry; you’re not alone. We’ll break down common issues and provide simple solutions to get your Keurig back in action.

1. Power Problems

  • Check the Outlet: Make sure the plug is securely in the outlet.
  • Circuit Breaker: If it’s still not working, check your circuit breaker for any tripped switches.

2. Faulty Power Cord: Look for any damage like fraying or exposed wires. If you see any, replace the cord for safety.

3. Water Woes: Ensure the water reservoir is filled and in its place. Your Keurig needs water to brew.

4. Clogged Needle: Sometimes, coffee grounds and gunk can clog the needle. Use a paperclip or needle-cleaning tool to unclog it.

5. Mineral Buildup: Minerals from water can build up inside your Keurig. Use a descaling solution to clean it up and improve performance.

6. Internal Clogs: Check parts like the exit needle and brewer’s head for clogs. This can block water flow.

7. Software or Firmware Glitches: If your Keurig has a digital display, check for firmware updates. Outdated software can cause issues.

How to Repair The Keurig K155 Clicking Won’t Turn On 

Let’s look more closely at each of the possible problems that might cause your Keurig K155 clicking won’t turn on:

1. Power Problems

  • Examine the Outlet: Sometimes an apparently difficult problem has a simple solution. Begin by ensuring that the power socket into which your Keurig is plugged in is working. Connect another electronic item, such as a smartphone charger or a light, to confirm the outlet is working. If the gadget functions properly, the problem may not be with the outlet.
  • Circuit Breaker: If your Keurig doesn’t start, even when the outlet is working, check your home’s circuit breaker. Find the one labeled “kitchen” or “appliances,” and if it’s off, push it to the “on” position to reset it. This might solve the problem!

2. Faulty Power Cord

Examine the power cable that connects your Keurig to the electrical outlet carefully. Examine the insulation for any apparent evidence of damage, such as frayed wires, exposed conductors, or breaks. If you see any damage, you must replace the power cable right away. Using a broken cable might offer electrical dangers and significantly harm the performance of your Keurig.

3. Water Woes

Check the reservoir if the water reservoir is empty, replenish it with water. If the water reservoir is empty, the machine will not function properly. Additionally, ensure that the reservoir is positioned correctly.

4. Clogged Needle

Clearing the Needle: As time goes on, coffee grounds and gunk can gather in the needle that pokes into the K-Cup when you brew coffee. This buildup can block the water and stop your Keurig from working like it should. To fix this:

  • Unplug your Keurig from the wall.
  • Open the K-Cup holder to get to the needle.
  • Carefully use a paperclip or a special tool made for cleaning needles to gently get rid of any junk on the needle. Be careful not to harm the needle while you clean it.

5. Mineral Buildup:

Descaling Process: Mineral deposits from the water you use can accumulate within your Keurig over time, affecting its performance. Descaling is a crucial maintenance step. Here’s how to do it:

  • Empty the water reservoir.
  • Fill the reservoir halfway with a descaling solution compatible with Keurig machines.
  • Run a brew cycle without inserting a K-Cup to allow the descaling solution to circulate through the machine.
  • Discard the used solution and thoroughly rinse the reservoir.
  • Refill the reservoir with clean water and run several brew cycles to ensure all traces of the descaling solution are flushed out.

6. Internal Clogs:

Check for Clogs: There are a few things within the Keurig K155 that may become clogged over time. These jams can slow down or even stop the flow of water. Examine the exit needle and the brewer’s head closely. If you see any jams in these spots, thoroughly remove any debris or accumulation using a paperclip or a brush.

7. Software or Firmware Glitches:

Update Firmware: If your Keurig has a digital display and you suspect software or firmware difficulties, go to Keurig’s official website and download the latest updates. Firmware updates are often released by manufacturers to correct issues and improve functionality. Download and install any available firmware updates for your individual Keurig model using the instructions provided.

8. Contact Keurig Support

Professional Help: If your Keurig K155 still won’t switch on after careful troubleshooting, it’s best to obtain professional help from Keurig’s customer service. They are prepared to offer specialist advice and solutions targeted at whatever you need. Prepare to offer information on your Keurig model, its history, and the procedures you took to figure out and fix the issue.

Preventative Solutions For Your Keurig K155 Clicking Won’t Turn On 

By following these preventative methods, you can maintain your Keurig’s performance and reduce the chances of encountering the “clicking won’t turn on” problem in the future.

  • Use Filtered Water: To decrease pollutants and mineral buildup, consider drinking filtered water.
  • Handle K-Cups and the K-Cup holder with care to prevent harming the components.
  • Stay Updated: Check the Keurig website for firmware updates to fix reported issues and enhance performance.
  • Create a Cleaning schedule: Create a schedule for regular cleaning and upkeep.
  • When storing your Keurig for a lengthy amount of time, clean it, remove the water reservoir, and keep it in a cold, dry area.

Final Words

To summarize, a Keurig K155 clicking won’t turn on can be an irritating issue, but it is not the end of your coffee-brewing trip. Please follow the troubleshooting procedures indicated in this article, you should be able to determine and tackle the problem. If anything else fails, contact Keurig support for professional assistance.

Leave a Comment