My Hamilton Beach Brewstation Is Leaking

If you have a Hamilton Beach Brewstation at home, it means you are a coffee lover. Although this machine is impressive, as an appliance, it may have some issues with leaking. If your Hamilton Beach Brewstation is leaking, you don’t need to worry if you are reading this. 

In this article, we will give you some solutions to fix this issue and also discuss why this leaking problem happens with the Hamilton Beach Brewstation.

How To Fix A Hamilton Beach Brewstation That Is Leaking

Leakage in the Hamilton Beach Brewstation may be caused by a variety of factors, such as an incorrectly connected water tank, an overflowing drip tray, loose screws, damage within, or issues with the coffee holder.

In order to fix all these issues, you need to clean the water tank and suction port with the help of vinegar, empty the drip tray on a regular basis, tighten the screws, and clean or change the coffee holder to avoid clogging.

Let’s discuss all these solutions in more detail

My Hamilton Beach Brewstation Is Leaking From The Bottom

You need to follow some steps to stop your Hamilton Beach Brewstation from leaking from the bottom. Here are some solutions to solve this leak issue:

The Water Tank Is Not Connecting Properly

A water exit is located at the bottom of the tank, and a similar suction port is located on the machine to which the tank is attached. Mineral accumulation can clog both of these parts. This can cause the water tank to become disconnected from the machine, resulting in a leak.

Clean these parts with vinegar for a quick repair.

For the machine’s suction port, fill it with vinegar and allow it to soak for about 30 minutes. At the same time, clean the water exit part using a toothbrush steeped in vinegar to remove any debris.

Afterwards, wash both parts well with water. After cleaning it, rebuild the machine and run a few cycles with only water to confirm that all of the vinegar has been removed.

This is often used to avoid leaks from the water tank. Regular inspections and cleaning may help to avoid this issue in the future.

Full Drip Tray

Usually, the drip tray in Hamilton Beach Brewstation is small in size, which is why it gets filled quickly and spills on the counter.

Keep an eye on the water level and drain it as soon as it begins to leak.

The Screws Need To Be Tightened

The screws that tighten the machine’s parts and hold them together can become loose over time and with consistent use. Loose screws may be the reason for the leakage, and This is a common issue with many machines.

The common area that may leak the most is near the brewing tank that connects to the coffee reservoir or the dispensing nozzle. If the screws at these points are not tightened, Water or coffee may pass through very tiny gaps, causing the leaks you’ve experienced.

Go around the appliance with the proper screwdriver (usually a Phillips head) and tighten all the loose screws, especially near the reservoir and brewing tank.  

Keep in mind that the purpose is to snug them up rather than overtighten them, since this can lead to threads being stripped and inflicting more harm than good.

Something Inside The Machine Is Broken

There may be internal damage to your Hamilton Beach Brewstation, which could be the reason for the leakage. It may be because of a hole in the tube or a loose connection. This may happen as a result of regular wear and tear or from mistreatment.

  • Holes in a Tube: Several internal tubes in the Brewstation deliver water and coffee throughout the entire machine. If one of these tubes develops a hole, This may result in leaks. These holes usually result from long-term use or inadvertent damage.
  • Tubes in Bulk: Likewise, these tubes might get loose from their connections at times. This might be due to the machine shifting quickly or the connections just degrading over time. If a tube is not firmly attached, coffee or water could leak from the machine.

In both cases, the solutions might be a little complicated for the ordinary coffee drinker. Without the proper tools and understanding, navigating the internal structure of the Brewstation may be tough.

So if you’re not confident separating your Brewstation or if you are not extremely handy, don’t do it. It will be good to contact Hamilton Beach’s customer support

How To Fix Hamilton Beach Brewstation that Is Leaking When Dispensing

Here are some of the solutions that you can try to stop your brewstation leakage while dispensing coffee:

The Coffee Holder Needs Cleaning

Over time, the residue of coffee and deposits of minerals collect in the coffee holder, This may result in leaks due to the disturbed water flow. Here’s a quick method for cleaning it properly:

  1. To begin, take out the coffee holder.
  2. Make a mixture of water and vinegar.
  3. Scrub most of the residue within the holder with a toothbrush. The vinegar mixture can help with the removal of dirt.
  4. Dry the interior of the coffee holder using a paper towel after cleaning to remove any leftover loose deposits.
  5. After you’ve washed and dried, make a solution of baking soda and hot water. Fill the mixture into the coffee holder and let it rest for an hour. Any leftover residue will be dissolved by baking soda.
  6. After one hour, properly clean the coffee holder with water.

Replace The Coffee Holder

If your coffee maker’s problem of leakage remains the same, despite having cleaned the coffee holder, it means that your coffee holder is broken from the inside. 

The constant heating and cooling from making coffee can eventually wear out the plastic. You could have observed breaks in the plastic during cleaning, but cleaning will not be able to fix the leakage.

So, the best solution for this will be to buy a new coffee holder. Which will definitely fix this issue.

Final Words

If your Hamilton Beach Brewstation is leaking and you don’t know what to do, then just following the steps mentioned in this article will solve your problem.

By maintaining your machine regularly, you can keep it free from leakage. All you need to do is keep an eye out for any damage inside and repair it as soon as you find any damaged parts. Lock any loose screws, and if a new part is required, these are frequently easily accessible.


Click here for troubleshooting tips for Keurig Coffee Maker

Leave a Comment