Nespresso Vertuo Leaking Water Or Coffee From Bottom

If you have a Nespresso Vertuo coffee machine, then you must be aware of its leaking problem, as it may leak water from the bottom. This problem is frustrating because it will mess up your counter and you will have to clean it, which will increase your work.

So to tackle this problem, we are going to cover all the possible causes of this Nespresso Vertuo leaking water problem and give you solutions to fix it. 

How Do I Fix Nespresso Vertuo Leaking Water From The Bottom?

The primary reasons why the Nespresso Vertuo is leaking water include blocked tubes, a machine that needs to be descaled, a leaking water tank, a full drip tray, and a broken machine.

To resolve this issue, you need to unblock the tube with the help of a baster or syringe, regularly descale your machine, add silicone grease or an O-ring to the water tank spout, drain the drip tray, and if the machine is broken, contact customer service for a replacement.

Unblock the Tubes Inside the Nespresso Vertuo

Over time, deposits of minerals can form in the tubes of the Nespresso Vertuo machine. This could reduce water flow or perhaps stop it totally. Sometimes the air bubble gets trapped in the tubes if you click the brew button when there is not enough water in the reservoir.

Whenever this happens, the Nespresso Vertuo machine can stop pumping water and begin leaking.

To clear the blockage or remove the air bubble, perform the following steps:

  1. Fill the tank halfway with water.
  2. Draw water from the water tank with a turkey baster, straw, or syringe and place it on the tank’s water suction port.
  3. While the coffee maker is attempting to prepare a cup, press the brewing button and, at the same time, spray water into the suction port.

In addition, inspect the little spring in the water tank’s suction port. Twist the top of the turkey baster, straw, or syringe a couple of times against the spring to remove any leftover material.

You may also try the following method:

  1. Remove the machine’s water tank.
  2. Connect a tube to the water suction port, making sure it fits snugly.
  3. Fill the tube halfway with water, then blow into it from the other end.

This will help to clear any blockages or air bubbles from the Nespresso Vertuo coffee maker, This enables it to correctly brew coffee to avoid leaks.

Your Nespresso Needs to Be Descaled

After unblocking the tubes from your Nespresso Vertuo with the help of a baster or syringe, Descaling is also useful in clearing the deposits of minerals that build up within the machine gradually.

If you descale your machine regularly, you can avoid and solve leaks to ensure a consistently great cup of coffee.

Here’s how descaling can help in the repair and prevention of leaks in your Nespresso Vertuo:

  1. Removes deposits of minerals: Regular descaling of your machine can protect it from deposits of minerals that might accumulate within the machine’s water tubes and other parts. These accumulations can reduce the water flow or be the reason for the blockage, resulting in leakage. Descaling assures that the machine runs smoothly and efficiently.
  1. Preserves seals and gaskets: Limescale accumulation can put strain on your machine’s seals and gaskets, leading them to wear out more quickly or become misaligned. Constant descaling can help preserve these components’ functionality, fix leaks, and boost the total efficiency of your Nespresso Vertuo.
  1. Improves water flow: Regular descaling can clear any blockages in the water tubes, providing for a consistent and effortless flow of water through the machine. This not only prevents leaks but also guarantees that your coffee is prepared at the appropriate temperature and pressure for excellent taste.

We have written a detailed article on how to descale your Nespresso Vertuo Plus Guides for the Nespresso Vertuo Line, and Next will be available shortly!

Generally, you need to descale your machine every three months, or more regularly if you are living in an area with hard water.

The Water Tank Is Leaking

A water tank that does not store enough water is the usual reason why the Nespresso Vertuo leaks.

The link between the machine and the water tank might deteriorate over time, resulting in a leak. Here are three methods for solving this problem:

  1. Apply “Haynes Silicone Grease” to the spout of the water tank. Apply grease to it and connect and disconnect the water tank several times. The silicon grease makes sure that everything fits correctly, and that any minor holes are filled to prevent leaks. It is food grade, therefore, it will not contaminate the water.
  1. Another approach is to wrap an O-ring around the spout of the water tank. The O-ring creates a seal between the water tank and the coffee maker. preventing water from leaking. O-ring sizes 7*2 or 8*2 should suffice.
  1. If you don’t want to solve the issue of leaking, by following the steps we have mentioned above, purchasing a new Nespresso Vertuo water tank is a simple solution.

Blockages In The Coffee Outlet Or Capsule Holder

Blockage in the capsule holder or in the outlet of your machine can result in water leaks and poor performance.

To prevent clogging and leaks, Regularly examine the coffee outlet, nozzle, and capsule holder for any collected material. To avoid issues, clean these parts on a regular basis, especially if you have hard water in your area.

Cleaning The Nozzle

  1. First, unplug your machine
  2. Soak your old toothbrush in warm, soapy water for a few minutes.
  3. Scrub the nozzle carefully to remove any buildup or obstructions.
  4. If the obstruction is in the nozzle, you may be able to gently remove it using a needle or paperclip. However, this may cause harm to specific models. Before performing this, it is best to examine your user manual or contact customer care.
  5. To remove any dislodged residue, run a hot water cycle.

Cleaning Capsule Holder

  1. First, unplug your machine
  2. To get access to the capsule holder, pull the lever.
  3. Soak your old toothbrush in warm, soapy water for a few minutes.
  4. Scrub the piercing plate and the rough area within the capsule where the silver section of the capsule sits gently.
  5. A wire brush may be required to remove significant buildup.
  6. To remove any dislodged residue, run a hot water cycle.

Empty The Drip Tray

Although it appears to be an easy remedy, it is frequently overlooked. The drip tray overflows when it gets full, resulting in water spilling over the countertop. To avoid this problem, remember to empty the drip tray on a regular basis.

Stopping Leaks in a Nespresso Vertuo Coffee Maker

If you want your Nespresso Vertuo machine to stay away from leakage and perform effectively, then follow these steps:

Inspect And Maintain Seals And Gaskets

Inspect rubber seals and gaskets in the brewing unit, water tank, and pod holder for indications of wear or damage on a regular basis. Replace worn-out or damaged seals as needed to maintain a tight seal.

Furthermore, ensure that the seals and gaskets are properly positioned to avoid leaks during the brewing process. Use a moist towel to carefully clean them to remove any coffee residue or debris that may be interfering with their efficacy.

Verify That All Components Are Correctly Assembled

Before any brewing process, check to ensure that the water tank, pod holder, and drip tray are all properly attached.

Check that the pod is correctly inserted and that the brewing unit is closed and secured in place. Leaks can occur throughout the brewing process if components are displaced or poorly constructed.

Fill the water tank with cold water.

Always try to fill the filter and cold water in the water tank. This will help to stop the extra pressure buildup within the machine, which might lead to leaks.

Always check that the water tank is not overfilled, As a result, water may pour over the edges or overflow during the brewing process.


Regular cleaning can keep your Nespresso Vertuo machine in top condition. Remove the water tank, pod holder, and drip tray and thoroughly rinse in warm, soapy water.

Also, clean the exterior of your coffee maker and the brewing equipment with a moist towel to remove any coffee debris or dust. Clean the inside as well to make sure that the sensor is able to read the pods properly.

Descaling the machine on a regular basis, as advised by Nespresso, will help in the prevention of mineral accumulation.

By following all the steps mentioned above, your coffee maker will work properly, stay leak-free, and produce wonderful coffee for many years to come.

Final Words

It can be annoying and messy, too, if your Nespresso Vertuo coffee maker is leaking. However, by knowing the reason for the leakage, you may fix it by following the steps mentioned in the above article.

Regularly, descaling and cleaning your machine is very important in order to prevent leaks.

Meet Vishu Yadav, the coffee connoisseur behind With a barista background and a love for coffee, he explores diverse coffee cultures and brewing techniques. Join him for the latest trends, specialty roast reviews, and brewing insights on

Leave a Comment