If you have landed here, it means you own a Keurig Mini, which is a good and compact coffee maker, and that’s the reason you have bought this machine. Although the machine performs excellently,
Sometimes, when you are craving a cup of coffee and go to brew one, you see that your machine is not pumping water to brew the coffee, and then you realize that there is an issue with your Keurig mini.
But don’t worry about that Without going anywhere, you can fix this issue of not pumping the water on your own by reading the article we have written for you.
Why Keurig Mini is Not Pumping Water
Before moving forward with the troubleshooting steps, it’s very important to understand the reasons behind the water pumping problem. There might be several reasons for this. One of the most common issues with this is that the heating component already has water in it. Another reason could be:
Clogged Water Line: Mineral deposits and coffee grounds can be collected from the water line of your Keurig Mini over time, causing obstructions that restrict water flow.
Insufficient Water Reservoir: The pump will not work properly if the water reservoir is not full.
These issues are the most common ones that lead to the problem of not pumping water.
Draining the Heating Component
Before starting the process, make sure that the machine is unplugged.
Remove the water reservoir from the coffee machine with care. Doing the draining operation will prevent any water from being sucked into the heating component.
Now carefully tilt the machine over a washbasin or container on one side to allow any extra water to drain from the heating component. If necessary, gently shake the coffee maker to encourage the water to flow out.
Once the extra water has been emptied, tilt the Keurig Mini for a few minutes to allow the remaining water to evaporate. You may also absorb any remaining moisture with a clean, dry towel.
To see if the heating component is completely dry, run a couple of water-only brew cycles. This will help to pour out any remaining water in the system. Ensure that no coffee pods are inserted throughout this process.
Once the heating component is completely dry, reassemble the Keurig Mini, and don’t forget to attach the water reservoir. Plug the machine in to test whether the problem has been solved or not.
Clean the Clogged Water Line
First, for safety purposes, you need to turn off your Keurig machine and unplug it from the power supply. Remove the water reservoir from the coffee machine with care.
Examine the water line, which is the tube or hose that connects the water reservoir to the coffee maker’s internal components. Examine the drain for any apparent signs of clogging, such as coffee grounds, trash, or mineral buildup.
If you see any clogs in the water line, carefully clear them by using a paperclip or any non-metallic object.
After you remove the clog, pass some water through the water line to confirm that it is fully open. Now fill the water reservoir with clean, fresh water and reattach it to the machine. To clean out any leftover trash or particles, run a few water-only brew cycles.
Once you’ve cleaned the water line, examine the coffee machine for any leaks or strange behaviour. Address any leaks as soon as possible, as they may signal a loose connection or further clogs.
To prevent future clogs Regular cleaning and maintenance is necessary.
If your tap water has a high mineral level, consider drinking filtered or bottled water. Using high-quality water can help lessen the risk of clogs caused by mineral deposits.
Descale the Machine
Descaling your Keurig Mini machine is necessary maintenance work because it helps in the removal of mineral deposits and scale retention within the machine. Water minerals can collect and block internal components over time, resulting in low water pressure. To effectively descale your Keurig Mini machine, follow these steps:
1. You need to purchase a commercial descaling solution that is specifically designed for coffee machines. For any reason, if you cannot buy the solution, you can make it by mixing an equal amount of white vinegar and water.
2. Turn off your machine and unplug it from the power socket for safety reasons. After that, remove the water reservoir from the machine and empty it if any remaining water is there.
3. Now mix the descaling solution according to the package directions. But if using vinegar, remember to dilute it with an equal amount of water. Fill the reservoir with the solution.
4. Place a large cup or container on the drip tray to catch the descaling solution.
5. Reinstall the water reservoir in the machine. Turn on the machine and start the brewing process without inserting the K-cup. Select the biggest cup size for the brew to pass through the machine.
6. Run multiple brewing processes to pass the descaling solution through the machine. The mineral deposits and scale accumulation will be dissolved. Continue brewing until the water reservoir is completely drained. Remove the liquid from the mug.
7. After the descaling process, turn the machine off and leave it for 30 minutes. This permits the descaling solution to act on any leftover deposits.
8. Now fill the water reservoir with clean, fresh water and run the brewing process multiple times with only water to rinse off any residual descaling solution from the internal components.
9. You can clean all the removal parts until the machine is rinsing, such as the water reservoir, drip tray, and K-cup holder, with warm water.
10. After properly rinsing the machine, perform several brewing cycles with simple water to ensure that all traces of the descaling solution are removed.
11. Finally, assemble all the removal parts properly, plug in your Keurig Mini machine, and run a test brew with a K-cup to check if the water pressure problem has been fixed.
Insufficient Water Reservoir
If the water level in the reservoir is low, replace it with fresh, clean water. Fill it up to the maximum fill line shown on the reservoir. Overfilling may result in spillage while brewing.
Check to see if the water level sensor within the reservoir is working properly. A faulty sensor may fail to correctly detect the water level, resulting in an inadequate water supply. If you suspect a sensor malfunction, see the user manual or contact Keurig support.
It’s really frustrating to know that your coffee maker is not pumping water. I hope you have solved this issue by reading our article and implementing all the techniques that we have shared in the above article.
Thanks For Reading